![]() Have you checked that the new reel of wire does not have any rust on it ? Surely not the liner.as when using ally wire then u use a plastic liner (I think)? Where exactly does the weld wire get the current for welding.is it the copper nipple on the end ? Is there a new Teflon type liner to replace the spring type.?.if so what results. Never had a problem quite like this.which at least the grey cells can remember. This machine has only been used for mild steel welding since new.Īlso, the machine is stored and used in a warm room, kept constantly at 22C I've used mig's since they first came out.this machine is a quality unit and like me semi retired but "still working". Now taken the new torch to bits, when feeding the fresh wire thru no problems but screw back on the bent part (head of the torch) the wire get's very very slow.remove the bent part, at the same feed setting, all OK. Having installed the new torch, the wire gets slowed down enough for the driving wheel to spin.tighten the tension screw and the wire ends up in a knot. the torch is a professional Binzal type, 4m long.still the same problem. The wire spool is new (15kgs) and have changed the liner with a brand new one, which is a close wound metal spring.still jamming.have now bought a quality new torch and cable complete (£100). ![]() Problem is the mig wire (0.6 mild steel) keeps jamming in the cable / tube.
0 Comments
Leave a Reply. |